Pērc OCTA polisi lētāk
Auto Noma
Follow ERGauto on Twitter

Ūnijas iela 8. korp. 46.
Rīga, LV-1084

Tālr.: 67032597
Fakss: 67032596
Mob.: 22330303
e-pasts: info@ergauto.lv

BMW prezentē 3 cilindru motoru.


BMW is introducing its three cylinder engine to the public soon. They discussed this last year in conjunction with the common engine architecture at their Innovation Day. So why go to three cylinders? Well there are a number of reasons, packaging, less friction, and emissions control among them.

In reality the three cylinder is not that different than an inline six, a ‘baby six’ if you will. And logically an inline six is merely two inline three cylinders. Like the six, the three cylinder has crankshaft throws at 120 degrees though there’s only one ignition event every 240 degrees of crankshaft rotation on the three.

The three cylinder will run well with a mono-scroll turbo (think how the N54 had one small turbos on each bank of three cylinders). The exhaust won’t sound funky either, like an inline five does. And the three cylinder should not be mistaken for a ‘three quarter four’, it is anything but.


The three cylinder configuration has a packaging advantage over a four cylinder in a transverse engined front wheel drive chassis. It is narrower (side to side) than a four cylinder and will allow for a narrower body or a tighter turning circle, if the manufacturer takes advantage of it.

There are some easily resolved noise, vibration, and harshness concerns with a three cylinder. The three cylinder configuration has a natural tendency to rock, nose to tail. But that can be effectively counteracted with a balance shaft. BMW does have experience with three cylinder engines, the A40 motorrad engine found in the BMW K 75 comes to mind immediately. It used two counter-rotating masses to cancel the vibration. Regardless the three cylinder will be a smooth runner in keeping with BMW’s premium character.

Even given the mass of the counter-balancing, there is the benefit of friction reduction in a three over a four, for example (a four has to be balanced also, truth be told). To use a racing example, it was frictional loses that drove F1 to a V10 rather than V12, which would have been a better balanced engine, a number of years ago. And then there is the improved emissions based on a more efficient configuration. And that is the heart of EfficientDynamics.

The BMW three is built, along with a new set of four and six cylinder engines, to share a common set of components. There’s a 60 percent commonality between three, four, and six for gas engines (and a 40 percent commonality with the diesel equivalents). There are some real savings, from costs of parts to assembly processes, to be gained from increased commonality. The common cylinder takes advantage of all of the award winning EfficientDynamics features, including direct injection, Valvetronic, and VANOS. In addition turbocharging is included to increase the overall efficiency of the package.

As important as the shared parts are, the common physics of a common cylinder/combustion chamber is equally as important. The combustion process is the same given that they are using a common cylinder configuration (common combustion chamber – even though they will change displacement as needed). That leads to standard intake, ignition, and exhaust events which means that the cost of ‘tooling’ software for ECU mapping is reduced. Rather than a separate set of software to handle the different combustion chamber shapes and valve gear, only a single combustion chamber shape and valve train have to be mapped.

With a common cylinder, the engineers can select the number of cylinders required for a particular chassis/weight. Rather than taking an existing four, for example, and reducing bore or stroke to make power targets, you select the number of cylinders needed to meet the targets.

The three cylinder engine will be matted to a new adaptive 8-speed transmission. Based on the current ZF 8-speed automatic, the new transmission utilizes a wide range of technologies, GPS mapping, DSC, wireless data connectiion, front and rear-mounted cameras and radar sensors, which all together can help the gearbox adapt its shifting pattern and power delivery to accommodate the road conditions.

That the i8 will have a turbo three gas engine speaks well to BMW’s ability to extract power from this configuration. BMW has built a sustainable roadmap for its inline engines that incorporates three, four, and six cylinder configurations. The 1.5L three will be the among them – a well built, efficient engine capable of powering some of BMW’s premium offerings. That it is good enough to be used in the i8 speaks to how highly BMW regards their ‘baby six’ engine.